The 46th International Vienna Motor Symposium will focus on following topics:

• Passenger car & commercial vehicle drive concepts
• Hybrid powertrains
• New engine concepts
• Hydrogen combustion systems
• Nonfossil fuels
• BEV and many more.

At the event, key subjects will be presented by more than 80 speakers from science, the automotive and supplier industries in three lecture halls.

Join us at 46th International Vienna Motor Symposium and get in contact ​​​​​​​with our sales team to gain more information on our products & engineering services.

This world conference is the largest and most comprehensive hardware and software exhibition on the subject of simulation. New technologies and innovative techniques will be presented.

Stop by at our FEMFAT booth to learn more about our simulation services & software and listen to the speech of our colleague W. Hinterberger on "Structural assessment of printed circuit board assemblies under consideration of static-, vibrational- and thermal loads based on finite element methods".

We look forward to welcoming you at "NAFEMS World Congress 2025".

​​​​​​​

Organized by JSAE, EVTeC is a conference that focuses on technologies for future mobility by xEV such as BEVs, HEVs, FCEVs, PHEVs and various other related technologies. 

Join the event and listen to the speech of our colleague Walter Hinterberger on "Structural assessment of printed circuit board assemblies under consideration of static-, vibrational- and thermal loads based on finite element methods".

​​​​​​​

Automotive Testing Expo is the leading event for the technologies and services in ADAS and autonomous vehicle testing, electric and hybrid powertrain testing, battery and range testing, EMI and NVH test and analysis and the full spectrum of test and validation technologies for full-vehicle, component and systems development.

Visit our booth and learn more about our testing capabilities at ECS St. Valentin.

We look forward to welcoming you at Automotive Testing Expo 2025!
 

The JSAE Automotive Engineering Exposition is the annual trade fair of the Society of Automotive Engineers of Japan, Inc. (JSAE).

Join the exhibition in Yokohama to see the latest automotive technologies and innovations firsthand and listen to the speech of our colleague on following topic "Proposal of entire NVH simulation process for eMotor under the various load spectra and correlation study to measurements".

The "VDI Nutzfahrzeuge Truck, Bus, Van, Trailer" conference in 2025 will focus on the transport solutions of the future.

The following key topics will be addressed in 2025:
* Sustainability and digitalization in commercial vehicles
* Path to autonomous driving/ADAS/HMI & operating concepts
* What will transport of the future look like?

Find out what Magna can contribute in making the mobility of the future more sustainable & visit our booth  to learn more about our engineering services.
Further, we will participate in the event with a lecture, on the topic "Optimizing Electric Powertrains for Commercial Vehicles: A Holistic Approach to Efficiency and Performance".

We look forward to welcoming you at VDI Nutzfahrzeuge!
 

At this conference in Würzburg, the latest international research developments in the field of multiaxial fatigue and fracture will be shared.

Magna will participate with a lecture on "Multiaxial fatigue life prediction based on complex invariants compared to critical cutting plane approaches".

At this two-day congress, experts from OEMs, suppliers, and universities present practical lectures on new trends as well as classical topics in drive technology.
Join the event to discuss the latest developments and perspectives of various concepts in the field of powertrain and transmission.

Magna Powertrain is participating at Dritev 2025 with a booth, where we will present our latest innovations and engineering services portfolio.

We look forward to welcoming you at our Magna booth!

From October 4-9, 2025, Brussels Expo will become the exhibition grounds containing Europe’s biggest and most globally oriented trade show.

Manufacturers of battery electric buses, autonomous buses, ticketing, interior design, fuel cells, HVAC and intercity buses will present their latest innovations. Furthermore, Busworld Europe 2025 will impress its visitors with an outstanding exhibition covering all aspects of the bus and coach industry, including components, software, future mobility, authorities and others.

Stop by at the Magna booth to learn more about our engineering services portfolio and our electro-hydraulic power steering pump. The EHPS is a product developed by ECS, that offers a wide range of benefits such as fuel savings, reduced CO2 emissions, increased steering system efficiency and demand-based steering support.

We look forward to welcoming you at Busworld Europe 2025!

Companies face the challenge of fundamentally redesigning their products and production processes. In addition to reducing greenhouse gas emissions, issues such as increasing product lifespan, repairability, and recyclability are becoming increasingly important.
​​​​​​​This conference provides a forum to present and discuss innovative solutions. In doing so, it makes an important contribution to driving the transformation towards a sustainable, digital, and competitive industry.

Visit us at our FEMFAT booth!

​​​​​​​​​​​​

Simulation models increasingly represent complex structures and material behavior. At the CADFEM Conference Künzelsau, leading companies present methods focusing on structural mechanics and simulation in product development, demonstrating the interplay of innovation, sustainability, and improved product properties using simulation tools.

FEMFAT will have its own booth and a member of our team will give a presentation.

We look forward to welcoming you at the "CADFEM Conference Künzelsau 2025".